Setup Instructions





Device Setup

First Time Setup:

You should have an enclayve device and an AC Power Adapter*

  1. Connect your device to power
    It should be near you and within range of your home WiFi network's main router.

    NOTE: if your home network is a mesh network, sometimes known as a "whole home network", your device must be close to the main router, not an extender box**

  2. Download the enclayve app

    3. Open the app, accept the EULA and tap on

    SET UP A DEVICE

    The app will guide you (similiar to the video below)
    The app will find your device using Bluetooth, so make sure Bluetooth is enabled on your phone.


*If convenient, you can use your own USB power source (e.g. the USB port on a powered hub) however, enclayve cannot guarantee your specific source will work. Your USB power source should be on at all times.
**Examples of mesh networks are eero, Google Nest, TP-Link Deco, Orbi, Linksys Velop, and others. If you only have a single router box in your home network, you do not have a mesh network.

A tour of your device



Technical Support

Report problems or send any questions here: support@enclayve.com

Device Setup Changed

WiFi Network Changes

If you've moved your device to a new location where your home WiFi netwwork has changed, another setup is required to maintain secure and private connections with everyone..

In general, your app will recognize this situation and prompt you for how to do the setup.